The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines.
- 1 Which oil is best for BMW?
- 2 What brand of oil do BMW dealers use?
- 3 Can I use any synthetic oil in my BMW?
- 4 Can a BMW use non full synthetic oil?
- 5 What is BMW approved oil?
- 6 Is Mobil 1 OK for BMW?
- 7 Is Liqui Moly BMW approved?
- 8 Is Castrol EDGE BMW approved?
- 9 Can I take my BMW to Valvoline?
- 10 Do I have to use BMW oil in my BMW?
- 11 Can you use 5W 40 instead of 5W 30?
- 12 Can I put 5W40 in my BMW?
- 13 What happens if you use non synthetic oil?
- 14 What happens if you put regular oil in a car that takes synthetic?
- 15 What happens if you put normal oil instead of synthetic?
Which oil is best for BMW?
Best Motor Oils for BMW
- Castrol EDGE 5W-30 Advanced Full Synthetic Motor Oil.
- Mobil 1 120760 Synthetic Motor Oil.
- Motul 007250 8100 X-cess.
- Pennzoil 550020166-6PK.
- Genuine Synthetic 5W30 Motor Oil.
- Valvoline Advanced Full Synthetic.
What brand of oil do BMW dealers use?
BMW Dealers predominantly use BMW’s original Twin Power Turbo engine oil branded as BMW Advantec synthetic oil or Genuine BMW Engine. In 2015 BMW changed from Castrol Oil (British Petroleum) to Shell Oil for making its proprietory synthetic motor oil.
Can I use any synthetic oil in my BMW?
Sure, any oil will get the job done, but engines are designed with a specific oil in mind. That’s why nearly every BMW owner’s manual will recommend to use “BMW synthetic” oil.
Can a BMW use non full synthetic oil?
BMW recommends synthetic oil because BMW uses extended OCIs. There is nothing wrong using non-synthetic oil in an engine as long as the oil meets the engine manufacturer’s specification.
What is BMW approved oil?
Mobil 1™ ESP LV 0W-30 is a fully synthetic low ash oil that has been approved by BMW Longlife-12 FE oils for use in petrol and diesel engines in Europe.
Is Mobil 1 OK for BMW?
It is important to use the right oil in your car to comply with the BMW manufacturer specifications. Using the right Mobil 1 product during routine servicing and according to your vehicle’s handbook will not affect the BMW manufacturer’s warranty.
Is Liqui Moly BMW approved?
LIQUI MOLY Special Tec B FE 5W-30 is officially approved for use by BMW for the Longlife-01 FE standard. These vehicles can use oil which complies with the newer and widely spread BMW Longlife-04 FE specification. This type of oil can only deliver its full performance with a specific quality of fuel.
Is Castrol EDGE BMW approved?
Does it say BMW long life approved in the back? Yes you can, but Castrol 0w-30 is a better choice, also BMW 5w-30 or M1 0w-40 are all better oils.
Can I take my BMW to Valvoline?
Approved and licensed for most VW, BMW, Mercedes-Benz, Audi and Porsche vehicles.
Do I have to use BMW oil in my BMW?
If you use the correct type of oil for the climate, with the correct oil level, changed at a regular interval, your engine will never be damaged as a result of what oil you use. You don’t have to use BMW’s oil.
Can you use 5W 40 instead of 5W 30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Can I put 5W40 in my BMW?
Registered. The Castrol oil that BMW used to spec was midway between a 30 and 40 weight. Anything from 0W30 to 5W40 will be fine if it has the LL-98 or LL-01 rating.
What happens if you use non synthetic oil?
Conventional oil, while cheaper than synthetic, is less refined and can lead to more engine sludge and gunk build -up down the road.
What happens if you put regular oil in a car that takes synthetic?
Answer. Synthetic oils typically provide better protection than conventional oils, but switching back and forth between full synthetic and conventional oil will not damage the engine.
What happens if you put normal oil instead of synthetic?
Switching between synthetic and conventional oils will not cause any damage to an engine. In fact, synthetic blends are a mixture of synthetic and conventional oil.