Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.
Contents
- 1 How do you clear a warning light?
- 2 Why are all my dashboard warning lights on?
- 3 How do I reset my dashboard after oil change?
- 4 How do I reset my malfunction indicator light?
- 5 Can you reset a check engine light yourself?
- 6 What does BMW check control mean?
- 7 How do you reset the dashboard warning light on a BMW?
- 8 What does the lightning bolt on my dash mean?
- 9 Where is the fuse for my dashboard lights?
How do you clear a warning light?
How to Reset the Warning Lights on the Dash
- Open the hood of your vehicle.
- Loosen the nut that holds the negative terminal to the battery with the pliers.
- Completely remove the cable from the negative battery terminal.
- Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.
Why are all my dashboard warning lights on?
The dash lights coming on and vehicle shutting down are, most likely, related to a charging system problem. It’s fairly common for all the dash lights to come on with no alternator output, low voltage can cause unusual electrical issues. The alternator should have been tested at the time of battery replacement.
How do I reset my dashboard after oil change?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.
How do I reset my malfunction indicator light?
How do I reset my malfunction indicator light? Another simple approach to get rid of the check engine light is to turn on and off the car three times. Insert the key in the ignition, turn the car on for a second, and turn it off for another second. Repeat this process three times.
Can you reset a check engine light yourself?
Turning the Ignition On and Off The on-off method is the equivalent fix for a vehicle’s check engine light. It forces the computer to refresh its saved state through a reboot. Simply place your key into the ignition and turn it on for 1-2 seconds, then turn it off for 1-2 seconds. Repeat this step three or four times.
What does BMW check control mean?
The Check Control monitors vehicle functions and alerts you to any malfunctions in the systems monitored. Such a Check Control message includes indicator and warning lamps in the instrument cluster and, in some circumstances, an acoustic signal as well as text messages at the top of the Control Display.
How do you reset the dashboard warning light on a BMW?
Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.
What does the lightning bolt on my dash mean?
The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset. The check engine light may remain on.
Where is the fuse for my dashboard lights?
Find the fuse that powers your dashboard lights. Check under the hood, under the dashboard, or near or in the glove compartment. Once you find the fuse box or boxes, remove the lid and check the diagram on the underside of the lid for a fuse labeled “dash lights” or just “lights.”