Engine Oil

Viscosity:	0W-30 (All TEMPS) SEO68
Capacity:	6.9 quarts. (with filter)After refill check oil level.
Torque:	18 ft/lbs (Oil Drain Plug) Replace drain plug seal.

How much oil does a BMW X5 take?

Fill the car with 7.5 quarts of full synthetic oil and screw the oil cap back onto your car when you are finished.

How many quarts does a 2016 BMW X5 take?

The recommended oil for the best performance in the 2016 BMW X5 is 0W-30 in all temperatures. The capacity for the vehicle iS6. 9 quarts with a filter for the 3.0 L 6-cylinder and 3.0 L 6-cylinder diesel and 10 quarts with a filter for the 4.4 L V8 engine.

How many quarts of oil does a 2007 BMW X5 take?

The 2007 BMW X5 has two engine options: the 3.0L V6, which takes 6.9 quarts of 5W30 or 5W40 synthetic oil or the 4.8L V8 that uses 8.5 quarts of 5W30 synthetic oil or 5W40 synthetic oil.

What oil does my BMW X5 need?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals. Pento HP can be used in all gasoline and diesel engines containing turbochargers as well as non-turbocharged vehicles requiring 5W-30.

How much is oil change for BMW X5?

BMW X5 Oil Change Cost Estimate. Labor costs are estimated between $44 and $56 while parts are priced between $124 and $140.

How much oil does a 2015 BMW X5 take?

6.9 quarts. (with filter)After refill check oil level.

What kind of oil does a 2016 BMW take?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals. Pento HP can be used in all gasoline and diesel engines containing turbochargers as well as non-turbocharged vehicles requiring 5W-30.

How do you reset the oil light on a 2016 BMW X5?

So let’s try to do it.

1. Turn on the ignition without starting the engine.
2. Clear any message.
3. Press and hold the RESET button.
4. Go to the ENGINE OIL.
5. Hold down the RESET button.
6. Hold down the button again to confirm.

What oil does a 2007 BMW X5 take?

BMW X5 2007, Pento Hight Performance SAE 5W-30 Full Synthetic Motor Oil, 1 Liter (1.06 Quarts) by Pentosin®.

What type of oil does a 2007 BMW X5 take?

Mobil Engine Oil Full Synthetic 5W-30 5 Quart Notes: OE Recommendation, Full synthetic. 5W-30. 5 quarts container.

How often does a BMW X5 need an oil change?

An oil change is one of the most leading and necessary services for your car. Synthetic oil usually should be changed every 7,500 – 10,000 miles. BMW recommends getting your 2021 BMW X5 oil & filter changed every 3,000-5,000 miles for conventional oil.

Can you use 5W 40 instead of 5W-30?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

What engine oil is recommended for BMW?

The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It’s the only oil approved in the US for BMW’s turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. It can also be used in most MINI engines.

What type of oil does a 2015 BMW X5 take?

If You don’t replace it, there will be issues with the engine. The total engine oil capacity for the 2015 BMW X5 xDrive35i model is 6.9 US Quarts (6.5 liters). It is advised to using only SAE classifications 0W-40, 0W-30, 5W-40 and 5W-30 for the 2015 BMW X5.